A Guide to Septic Tank Installation
Septic systems are usually installed in rural areas as well as cottages. Waterfront properties normally tend to be more challenging for doing septic tank installation primarily because of the moist soil. Depending on the condition of the soil where the tank will be installed, the system might not be as efficient and effective in treating wastewater as well as harmful bacteria might enter your system. It’s integral that you have a great idea of what you are doing when doing the installation. Don’t hesitate to call professionals whenever you are in doubt.
Taking a quick trip to local municipal office has to be made for you to acquire the necessary permits and guidelines. This includes what size of tank is ideal that could be determined by how many people in your household. Say that the municipal office is of no help, then you should get your property’s measurement and hire a house inspector.
It is integral that you finalize what type of tank you like. One of the most common options used are concrete but as time goes by, more and more people are using plastic tanks. Plastic tanks are lighter in weight and at the same time, they last longer as well.
You have to take into account where you would put the septic tank on your house. Home inspectors will help you in determining the distance required from the house, property lines, water frontage and the likes. Field bed is necessary as well because this is the place where wastewater is filtered. Its size must be something that is corresponding the size of your septic tank. It must consist of the proper sand or soil. Make it a point that you don’t forget to secure the right construction permits or everything that you have done will be put to waste.
As you have made the measurements, make it a point that you’ve called a house inspector to double check everything before you start with anything. An inspector will be requesting for a perc test or the test performed to see how long will it take for the water to filter in the soil. This will show if there’s anything that should be added to the soil in prepping the septic tank installation. Once the perc test has gotten an approval, then that is the time when you should push through with the digging.
Unless you’ve had experience in doing septic tank installation on your own, you must hire pros to come to your place in order to dig holes for the tank. The tank will be lowered into the hole once it is dug. Be sure that it’s leveled by shoveling a bit of gravel or rock to firm the base into place.